Rubber Terminologies - C
C
Cement: Unvulcanized raw or compounded rubber in a suitable solvent used as an adhesive or sealant.
접착제 또는 밀봉 제로 사용되는 적절한 용매에서 미가공 된 합성 고무 또는 가황되지 않은 고무.
Clay:Commonly used as an extender in rubber.Treated clay reinforce the rubber and are termed hard clay. Those which do not provide reinforcement are called soft clay.
일반적으로 고무에 extender로 사용됩니다. 치료 점토는 고무를 보강하고 하드 클레이라고합니다. 보강을 제공하지 않는 사람들은 부드러운 점토라고합니다.
Chloroprene – 2 – Chloro, 1, 3 butadiene, CH2CC1CHCH2, monomer for neoprene rubber.
Compound: A term used to a mixture of polymers and other ingredients to produce a usable rubber material.
사용 가능한 고무 재료를 생산하기 위해 중합체와 다른 성분의 혼합물에 사용되는 용어.
Compression ratio: In hose, a measurement shown in percentages reflecting axial compressibility of a duct.
호스에서는 측정 값이 백분율로 표시됩니다
Compression set: The amount by which a rubber specimens fails to return to its original shape after release of compressive load.
압축 하중이 풀린 후 고무 표본이 원래 모양으로 돌아 가지 않는 양.
Conductive Rubber : A rubber capable of conducting electricity.Most generally applied to rubber products used to conduct static electricity.
전기를 통할 수있는 고무. 고무 제품에 가장 일반적으로 적용됩니다.
Copolymer: A polymer consisting of two different monomers chemically combined.
Corona Resistance: The ability of a rubber acting as insulator to withstand the effects of high voltage discharge. Inductions of failure appear as surface cracks.
절연체로 작용하는 고무의 내구성 오류의 유도
Corrosive(Packing): A property of packing whereby it is assumed to promote corrosion of a rigid member of a trapped fluid.
포획 된 물체의 단단한 부재로 간주되는 패킹 물성.
Cross Linking: Process of bridging individual rubber molecules through the formation of covalent chemical bonds between the rubber molecules.
Crumb Rubber: Vulcanised wasted rubber which has been ground down to a desired mesh size for addition to new compound as a filler. Also is called ground rubber.
Cracking: A sharp break or fissure in the surface, generally caused by strain and environmental conditions.
Crimped Style Hose: A mechanical lock hose construction whereby the external metal helix acts as a filler and securely crimps the overlapping folds of fabric. No adhesives or glues are required and the style is engineered for higher temperature and acoustic applications.
Cracking: The Sharp break or fissure in the surface generally due to excessive strain.
Creep: The progressive relaxation of a given rubber material while it is under stress.This relaxation eventually results in permanent deformation.
Crepe Rubber: Any form of natural rubber marketed with the rough surface produced by passing the rubber through as series of mills with grooved rolls traveling at different speeds.
Cross linking agents: A chemical that bonds the polymer chains together to form a thermoset rubber product.
Crosshead Extruder – An extruder so constructed that the axis of the emerging product is a right angle to the axis of the extruder screw, commonly used for applying the cover to braided or spiraled hose or covering wire conductors
Cure Date: Date when an O-ring was molulded.
Cup Lump: A blanket crepe rubber produced from the dries films and lumps of rubber found in the tapping cups at the beginning of the next tapping.
Curing Temperature: The temperature at which the rubber product is vulcanised.
Cut off factor: In hose , the hose length to be subtracted from the overall assembly length that allows for the hose coupling end connection extension beyond the end of the hose.
호스의 호스 길이는 호스 연결 끝 연결을 허용하는 전체 조립 길이에서 뺍니다.
C
Cement: Unvulcanized raw or compounded rubber in a suitable solvent used as an adhesive or sealant.
접착제 또는 밀봉 제로 사용되는 적절한 용매에서 미가공 된 합성 고무 또는 가황되지 않은 고무.
Clay:Commonly used as an extender in rubber.Treated clay reinforce the rubber and are termed hard clay. Those which do not provide reinforcement are called soft clay.
일반적으로 고무에 extender로 사용됩니다. 치료 점토는 고무를 보강하고 하드 클레이라고합니다. 보강을 제공하지 않는 사람들은 부드러운 점토라고합니다.
일반적으로 고무에 extender로 사용됩니다. 치료 점토는 고무를 보강하고 하드 클레이라고합니다. 보강을 제공하지 않는 사람들은 부드러운 점토라고합니다.
Chloroprene – 2 – Chloro, 1, 3 butadiene, CH2CC1CHCH2, monomer for neoprene rubber.
Compound: A term used to a mixture of polymers and other ingredients to produce a usable rubber material.
사용 가능한 고무 재료를 생산하기 위해 중합체와 다른 성분의 혼합물에 사용되는 용어.
Compression ratio: In hose, a measurement shown in percentages reflecting axial compressibility of a duct.
호스에서는 측정 값이 백분율로 표시됩니다
사용 가능한 고무 재료를 생산하기 위해 중합체와 다른 성분의 혼합물에 사용되는 용어.
Compression ratio: In hose, a measurement shown in percentages reflecting axial compressibility of a duct.
호스에서는 측정 값이 백분율로 표시됩니다
Compression set: The amount by which a rubber specimens fails to return to its original shape after release of compressive load.
압축 하중이 풀린 후 고무 표본이 원래 모양으로 돌아 가지 않는 양.
압축 하중이 풀린 후 고무 표본이 원래 모양으로 돌아 가지 않는 양.
Conductive Rubber : A rubber capable of conducting electricity.Most generally applied to rubber products used to conduct static electricity.
전기를 통할 수있는 고무. 고무 제품에 가장 일반적으로 적용됩니다.
Copolymer: A polymer consisting of two different monomers chemically combined.
Corona Resistance: The ability of a rubber acting as insulator to withstand the effects of high voltage discharge. Inductions of failure appear as surface cracks.
절연체로 작용하는 고무의 내구성 오류의 유도
Corrosive(Packing): A property of packing whereby it is assumed to promote corrosion of a rigid member of a trapped fluid.
포획 된 물체의 단단한 부재로 간주되는 패킹 물성.
Cross Linking: Process of bridging individual rubber molecules through the formation of covalent chemical bonds between the rubber molecules.
Crumb Rubber: Vulcanised wasted rubber which has been ground down to a desired mesh size for addition to new compound as a filler. Also is called ground rubber.
Cracking: A sharp break or fissure in the surface, generally caused by strain and environmental conditions.
Crimped Style Hose: A mechanical lock hose construction whereby the external metal helix acts as a filler and securely crimps the overlapping folds of fabric. No adhesives or glues are required and the style is engineered for higher temperature and acoustic applications.
Cracking: A sharp break or fissure in the surface, generally caused by strain and environmental conditions.
Crimped Style Hose: A mechanical lock hose construction whereby the external metal helix acts as a filler and securely crimps the overlapping folds of fabric. No adhesives or glues are required and the style is engineered for higher temperature and acoustic applications.
Cracking: The Sharp break or fissure in the surface generally due to excessive strain.
Creep: The progressive relaxation of a given rubber material while it is under stress.This relaxation eventually results in permanent deformation.
Crepe Rubber: Any form of natural rubber marketed with the rough surface produced by passing the rubber through as series of mills with grooved rolls traveling at different speeds.
Cross linking agents: A chemical that bonds the polymer chains together to form a thermoset rubber product.
Crosshead Extruder – An extruder so constructed that the axis of the emerging product is a right angle to the axis of the extruder screw, commonly used for applying the cover to braided or spiraled hose or covering wire conductors
Cure Date: Date when an O-ring was molulded.
Cup Lump: A blanket crepe rubber produced from the dries films and lumps of rubber found in the tapping cups at the beginning of the next tapping.
Curing Temperature: The temperature at which the rubber product is vulcanised.
Cut off factor: In hose , the hose length to be subtracted from the overall assembly length that allows for the hose coupling end connection extension beyond the end of the hose.
Cut off factor: In hose , the hose length to be subtracted from the overall assembly length that allows for the hose coupling end connection extension beyond the end of the hose.
호스의 호스 길이는 호스 연결 끝 연결을 허용하는 전체 조립 길이에서 뺍니다.
Comments
Post a Comment